Applicable fibers*1 |
SM, MM, DS, NZDS, High-Index, EDF, LDF |
SM, MM, DS, NZDS, High-Index, EDF, LDF, PMF |
Cladding diameter |
80 to 500μm |
Coating diameter |
160 to 2000μm (In Fiber holder) 160 to 900μm (Coating clamp splice) |
160 to 1300μm (In Fiber holder) 160 to 900μm (Coating clamp splice) |
Fiber cleave length |
3 to 5mm (Coating clamp splice) 8 to 11mm (Cladding clamp splice) |
Typical splice loss*2 |
SM(ITU-T G652): 0.014dB |
Typical extinction ratio*2 |
− |
PANDA: -36.8dB*3 (Angle offset: 0.6degree) |
Return loss |
>60dB |
Typical splice time*4 |
15s (SM by cladding clamp splice) |
15s (SM by cladding clamp splice) 40s (PANDA by cladding clamp splice) |
Tension strength |
1.96N (+0% to +20%) |
Applicable protection sleeve length |
10 to 60mm |
Typical heat time |
35s (S922:40mm sleeve) |
Splice programs |
Max.200 |
Heater programs |
Max.100 |
Splice data storage |
Max. 1000 including 4 images before and after splice |
Fiber image magnification on LCD |
104X, 278X or 556X |
Dimension |
210W x 180D x 150H mm |
Weight (without Battery) |
4.5kg |
4.75kg |
Monitor |
4.3” wide color LCD with touch panel |
Data output |
USB ver. 2.0 type A: 1 port USB ver. 2.0 mini B: 1 port |
Battery capacity (Optional)*5 |
Typical 60 splice / heat cycles |
Operating temperature |
0 to 40°C |
Storage temperature |
-40 to 60°C |
Humidity |
0 to 90% (Non-condensing) |
Power source |
AC input 100 to 240V (50/60Hz) |