FITEL S185PMROF

FITEL High-end Fusion Splicer S185 series featuring ROF (Ring of Fire) models S185PMROF

Though the main body is the same compact design of the S185 series, Ring of Fire models equip the powerful arc-discharging with three electrodes instead of two electrodes. This arc-discharging makes the plasma field (high temperature field) wider and enables fusion splicing of large diameter fibers up to 800μm cladding diameter. This unique arc-discharging can heat optical fibers uniformly and reduce the splice loss of the fibers with dissimilar cladding diameters.

Product Features

  • Allows for High Strength Splicing
  • Low splice loss
  • Compact size
  • High capacity built-in battery (Optional)
  • LCD touch panel provides easy operation
  • Fiber clamps land gently to prevent damage to the fiber
  • Short fiber cleave length allows to use ultra mini sleeve
  • Remote control by Wi-Fi communication

Technical Specifications

Description S185HS S185PM
Applicable fibers1 SM, MM, DS, NZDS, High-Index, EDF SM, MM, DS, NZDS, High-Index, EDF, PMF
Cladding diameter 80 to 150μm
Coating diameter 160 to 2000μm (In Fiber holder) 160 to 900μm (Coating clamp splice) 160 to 1300μm (In Fiber holder) 160 to 900μm (Coating clamp splice)
Fiber cleave length 3 to 5mm (Coating clamp splice) 8 to 11mm (Cladding clamp splice)
Typical splice loss2 SM(ITU-T G652): 0.014dB
Typical extinction ratio2 PANDA: -36.8dB3 (Angle offset: 0.6degree)
Return loss >60dB
Typical splice time4 15s (SM by cladding clamp splice) 15s (SM by cladding clamp splice) 40s (PANDA by cladding clamp splice)
Tension strength 1.96 (+0% to +20%)
Applicable protection sleeve length 10 to 60mm
Typical heat time 35s (S922:40mm sleeve)
Splice programs Max.200
Heater programs Max.100
Splice data storage Max. 1000 including 4 images before and after splice
Fiber image magnification on LCD 104X, 278X or 556X
Dimension 210W x 180D x 150H mm
Weight (without Battery) 4.5kg 4.75kg
Monitor 4.3” wide color LCD with touch panel
Data output USB ver. 2.0 type A: 1 port USB ver. 2.0 mini B: 1 port
Battery capacity (Optional)5 Typical 60 splice / heat cycles
Operating temperature 0 to 40°C
Storage temperature -40 to 60°C
Humidity 0 to 90% (Non-condensing)
Power source AC input 100 to 240V (50/60Hz)

 

  1. Fibers should be applied to ITU-T standard. In case of other fibers, depending on the type of fiber, the optimization of splice program may be needed or the splice result may not be satisfied.
  2. These are references. Depending on the environment and condition, the number vary.
  3. Extinction ratio -36.8dB is measured in the condition that the initial extinction ratio is -40dB and there is the splice with 0.6 degree of rotation offset.
  4. This value is references. Depending on the type of fiber and condition of fiber on splicer, the number can vary.
  5. This value can produce using fully charged brand new battery at room temperature 20 degree C. Depending on the condition of the battery and operation environment, the number can vary.

Standard Package & Accessories

Item P/N Quantity
S185HS S185PM
-00 -01 -10 -11 -00 -01 -10 -11
S185HS Main body S185HS- X-A-0001 1 1 1 1
S185PM Main body S185PM- X-A-0001 1 1 1 1
Hard Carrying Case HCC-12 1 1 1 1
Built-in Battery Pack S947B 1 1 1 1
AC Adapter S981A 1 1 1 1 1 1 1 1
AC Cable Cord 1 1 1 1 1 1 1 1
Z Stage Lock ZL-01 1pair 1pair 1pair 1pair 1pair 1pair 1pair 1pair
Spare Electrode ELR-03 1pair 1pair 1pair 1pair 1pair 1pair 1pair 1pair
Electrode Sharpener D5111 1 1 1 1 1 1 1 1
Cleaning Brush VGC-01 1 1 1 1 1 1 1 1
User Manual 1 1 1 1 1 1 1 1